Recent News

Swiss-made polycarbonate sheets, precision formed and drilled to the original specification.

Now available!

Others talk about "volume buys", we actually do it! Tooling costs for the reproduction steering racks are recovered with this recent shipment - we are passing on the cost savings! New steering racks are now just $199 and now with the best warranty - five years! Tie-rod ends ($24.94 ea) and left and right rack mount bushings ($28.15 ea) sold separately.

Don't take chances with a rebuild on this safety critical part - get a new part and get back on the road quicker!

SP10691 Pin retainer clips are now available at a great new price - made to the original factory drawings, too!

Repro glovebox inserts (part number 101329) back in stock! Vacuum formed plastic and flocked with the fuzzy black material on the inside just like the later-style factory parts. Made in the USA!

We've had many requests to bring back the "old school" version of the console switch cover (part number A1000202) and we're happy to announce that these are also now in stock!

For many years owners have asked for the early style air cleaner label, which has been unavailable for many years.

This earlier style (shown above, part number 108718) was replaced by the larger, 110096 which contained details about the need to change the filter at certain intervals. Made to the design as spec'd in the factory drawing, this new part is the same dimensions, design, colors and finish as the originals.

More new parts...at left, the 102343 Hollow Bolt. Your DeLorean uses 16 of them. Originals were mild steel, zinc plated. We wanted stainless, but also wanted the nice, original zinc look - so we did it just like that. Stainless and zinc plated - $5.95 each!

At right, the 102141 water pump bleeder screw. Many are chewed up and nasty looking. We made these from brass, like the originals, but made the hex on them slightly wider so you get a better grip on them and they're less likely to get...

After a year or so of being out of stock, we are very happy to announce that the 108921 HVAC panel decals are again available.

The factory had perhaps as many as fiver different styles of these, as seen here.

It would have been cost prohibitive to each of the five different versions so chose the style that we seemed to see most often in cars at our service centers.

Originally introduced in early 2000's, we are pleased to re-introduce this great part for DeLorean cars.

Replacing the original "shaft-style" radio with a modern DIN-sized unit usually means carefully cutting the original bracket to the accept the larger stereo. A mistake here, at best, made for sloppy install or at worst, completely destroying the now rare and no longer available original component.

This modern replacement, laser-cut from mild steel and powder coated, means a quicker...

Final sample approval on these two reproduction parts - seat recline knob and the seat recline knob insert - were signed off recently. Stock of both of these parts are available now!

For more than four years we've offered our exclusive high-quality, 8mm silicone spark plug wires. These come with boots that are far superior to even the OEM wires and conveniently numbered for easy identification. We recommend plugs and wires as part of the "30,000 mile or every four years" service. And yes, we have loads in stock!